FORCE4 Standard 25 P/N 531743-LRG-CP Combo Pack for Large Gas Saws
FORCE4 Standard Combo Pack for large gas saws include:
(2) P/N 531743 FORCE4 standard 25 Chains
(1) P/N 553208 FORCE4 12" Guide bar
(1) P/N 525496 FORCE4 Sprocket for ICS Gas Saws (7-spline)
FREE GROUND FREIGHT.
(2) P/N 531743 FORCE4 standard 25 Chains
(1) P/N 553208 FORCE4 12" Guide bar
(1) P/N 525496 FORCE4 Sprocket for ICS Gas Saws (7-spline)
FREE GROUND FREIGHT.
| Article number: | 531743-LRG-CP |
| Availability: | Out of stock |
FORCE4 Standard Combo Pack for large gas saws include:
(2) P/N 531743 FORCE4 standard 25 Chains
(1) P/N 553208 FORCE4 12" Guide bar
(1) P/N 525496 FORCE4 Sprocket for ICS Gas Saws (7-spline)
FREE GROUND FREIGHT.
FEATURES AND BENEFITS OF FORCE4 STANDARD CHAINS
- Tough general purpose diamond chain.
- Provides a 12" Cutting Depth on Large Gas Saws
- FORCE4 tested 1.5 times the tensile strength of FORCE3 chains.
- Use the "Chain Selection Chart" (below) to find the best chain for your application.
Chain Tensioning
(CP) COMBO PACKS Save you Money! Buy two chains, get the guide bar and Sprocket FREE!
Related products
*** THIS CHAIN IS DISCONTINUED *** It has been replaced by the IC12-648023 ICS Force 4 Standard with Trident segment technology. Good for standard pressure concrete with no rebar.
$679.95
*** THIS BAR HAS BEEN SUPERCEEDED TO THE IB10-635704 *** Referred to as a 10" Guide Bar based on cutting depth, this bar measures 16.7" from tip to tip. For use on hydraulic or pneumatic saws.
$159.95
FORCE4 & PowerGrit drive sprocket for ICS Gas Saws. Part Number: 525496. Fits ICS 695XL-F4, 680ES, 633F4 powerheads running F4 0.444-inch pitch chains.
$39.95