Showingof 15 item(s)
Referred to as a 14" Guide Bar based on cutting depth, this bar measures 19.7" from tip to tip. For use on medium gas saws and 536E 220volt saws. Will be replaced by IB14-635697.
$199.95
12" cutting depth guide bar for ICS 12" 695XL-GC gas chainsaw powerheads. Silver/grey colored, and operates FORCE3 3/8" pitch diamond chains.
FREE GROUND SHIPPING to most lower 48 U.S. destinations
FREE GROUND SHIPPING to most lower 48 U.S. destinations
$182.95
This bar replaces IB16-71600. 16-inch cutting depth, 21.7-inches from tip-to-tip. Runs Force3 3/8-inch pitch chains on large gas saws.
$262.95
Black powder-coated concrete cutting guide bar with deep grooves and laser-cut water channels. Fits ICS hydraulic 890, 890 Flush, and pneumatic 701A saws + FORCE4, PowerGrit, PowerGritXL series chains. Replaced #529829.
FREE GROUND FREIGHT to lower 4
FREE GROUND FREIGHT to lower 4
$172.95
This bar replaces the IB25-525320 guide bar for use on ICS hydraulic and pneumatic power heads. 25" cutting depth, this bar measures 30.1" from tip to tip.
$412.95
The PowerGrit 680ES guide bar fits ICS 10" 680ES saws and operates PowerGrit/PowerGritXL diamond chains.
Larger diamonds, better control, and increased safety for concrete, masonry, and other hard surfaces. FREE GROUND SHIPPING to most lower 48 U.S.!
Larger diamonds, better control, and increased safety for concrete, masonry, and other hard surfaces. FREE GROUND SHIPPING to most lower 48 U.S.!
$182.95
ICS 890, 890-FL, 701A, 880F4 hydraulic and pneumatic saw guide bar with 10" cutting depth. ONLY WHILE SUPPLIES LAST!
FREE GROUND SHIPPING to most lower 48 U.S. destinations.
FREE GROUND SHIPPING to most lower 48 U.S. destinations.
$159.95
ICS 12" Guide Bar (cutting depth), 19.5" from tip to tip. For use on medium gas saws with 25 segment PowerGrit Chains ONLY - Use on 536E 220v saws with 25 segment FORCE4 or PowerGrit Chains.
$159.95
WHILE SUPPLIES LAST, LIMITED STOCK AVAILABLE. For use on ICS 695XL-F4 large gas powerheads running 0.444" pitch chains. This item has been replaced by #635706 guide bar. FREE GROUND SHIPPING to most lower 48 U.S. destinations.
$159.95
*** THIS BAR IS NO LONGER AVAILABLE *** replaced by IB16-635701. Referred to as a 16" Guide Bar based on cutting depth, this bar measures 21.9" from tip to tip. For use on large (695XL-F4) gas power heads running .444-inch pitch chains.
$259.95
For use on ICS large gas 695XL-F4 powerheads running 0.444" pitch chains.
$322.95
This bar replaced IB16-524490. 16-inch cutting depth -- measures 21.9-inches from tip-to-tip. For use with large gas (695XL-F4) power heads running .444-inch pitch chains.
$272.95
This a 12-inch guide bar compatible with large gas (695XL-F4) ICS power heads running .444-inch Force4 chains. Its total length from tip-to-tip is 18-inches.
$182.95
Replaces IB15-523080 guide bar for ICS hydraulic and pneumatic power heads running .444-inch pitch chains. 15-inch cutting depth, overall length: 20.3-inches from tip-to-tip.
$222.95
This bar replaces IB20-529767 guide bar. Referred to as a 20" Guide Bar based on cutting depth, this bar measures 24.8" from tip to tip. For use on hydraulic and pneumatic saws running .444-inch pitch Force 4 chains.
$272.95
Showingof 15 item(s)