FORCE3 Guide Bars - 3/8" Pitch
FORCE4 & PowerGrit Guide Bars - 0.444" Pitch
Find your Guide Bar by saw model:
- Small Gas Saws: 603GC, 660GC, RZ60
- Medium Gas Saws: 613GC, 680GC, 680ES
- Large Gas Saws: 623, 633, 695 series saws
- 536E 220volt Single Phase Saws
- 814PRO Saws
- Hydraulic and Pneumatic Saws: 853PRO, 880F4 890F4
- Husqvarna
- Stihl RockBoss
Showingof 29 item(s)
*** THIS BAR IS NO LONGER AVAILABLE *** replaced by IB16-635701. Referred to as a 16" Guide Bar based on cutting depth, this bar measures 21.9" from tip to tip. For use on large (695XL-F4) gas power heads running .444-inch pitch chains.
$259.95
This bar replaces IB16-524490. 16-inch cutting depth -- measures 21.9-inches from tip-to-tip. For use with large gas (695XL-F4) power heads running .444-inch pitch chains.
$259.95
Husqvarna 9-Spline drive sprocket for ICS FORCE3 Chains Part Number: 506334201
$49.95
Referred to as a 12" Guide Bar based on cutting depth, this bar measures 19.5" from tip to tip. For use on medium gas saws with 25 segment PowerGrit Chains ONLY - For use on 536E 220v saws with 25 segment FORCE4 or PowerGrit Chains.
$159.95
FORCE3 Drive Sprocket - to use ICS Bar and Chains on your Stihl RockBoss Concrete Chainsaw
P/N 562165
P/N 562165
$34.95
This bar replaces IB20-529767 guide bar. Referred to as a 20" Guide Bar based on cutting depth, this bar measures 24.8" from tip to tip. For use on hydraulic and pneumatic saws running .444-inch pitch Force 4 chains.
$259.95
This bar replaces IB16-71600. 16-inch cutting depth, 21.7-inches from tip-to-tip. Runs Force3 3/8-inch pitch chains on large gas saws.
$249.95
Referred to as a 13" Guide Bar based on cutting depth, this bar measures 14.9" from tip to tip. For use on ICS 814PRO saws. Replaces IB13-74042.
$189.95
Referred to as a 12" Guide Bar based on cutting depth, this bar measures 17.4" from tip to tip. For use on large gas (ICS 695XL-GC ) power heads running 3/8-inch pitch chains.
$159.95
*** PLEASE NOTE: THIS GUDE BAR IS DISCONTINUED *** Replaced by IB25-635702. For use on ICS hydraulic and pneumatic powerheads.
$399.95
*** THIS BAR IS BEING DISCONTINUED *** Will be replaced by IB20-635703. Referred to as a 20" Guide Bar based on cutting depth, this bar measures 24.8" from tip to tip. For use on hydraulic and pneumatic saws running .444-inch pitch F4 chains.
$259.95
*** THIS BAR IS NO LONGER AVAILABLE *** Replaced by the IB16-632196. Referred to as a 16" Guide Bar based on cutting depth, this bar measures 21.7" from tip to tip. For use on large gas saws running 3/8-inch pitch chains.
$249.95