575865 Force3 695XL-GC 16" GAS SAW PACKAGE

Add your review

Cut concrete up to 16" deep, 3/8" pitch bar and chains. ICS Saw Wet Cutting System - minimum 2gpm @ 20psi.

INCLUDES:
1qty - 581192 695XL-GC Powerhead
1qty - 632196 Force3 16-inch Guidebar
2qty - 584294 Force3 Standard Chains

FREE GROUND SHIPPING!

Default

Make a choice:

$2,999.95

+ -

Add to cart

Specifications

WEIGHT:	21 LBS. powerhead only
BAR LENGTH:	Up to 16-inches (20-inches w/ precut)
ENGINE SPEED :	9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle)
HORSEPOWER:	4.8kW (6.4 hp) @ 9000 rpm
TORQUE:	5.7 Nm (50.4 in-lbs) @ 7200 rpm
ENGINE TYPE :	2-stroke, air cooled
DISPLACEMENT:	94cc (5.7 cu-in)
CHAIN SPEED:	28 m/s (5500 ft /min)
POWERHEAD DIMENSIONS :	46cm (18") L x 36cm (14") H x 30cm (12") W
NOISE LEVEL :	102 dB @ 3 ft (1 m)
VIBRATION LEVEL:	8 meters/second2 (front handle)
WATER SUPPLY:	Minimum 20 psi (1.5 bar)
FUEL MIX RATIO :	50:1 (4%) fuel-to-oil
FUEL CAPACITY :	0.26 gal (1.0 liter) estimate 15-18 minute run time per tank

Brand:

ICS

Add to wishlist / Add to compare / Print

Information

Article number:	IPG-575865
Availability:	Out of stock

EASY TO START IN ALL WEATHER AND ALTITUDES and QUIET OPERATION

This saw package is perfect for the general contractor looking for more power and versatility.

Re-engineered piston and cylnder provide cooler operation
Operates Force3 3/8" pitch chains as well as .444-pitch chains
Up to 16" cutting depth
Powerful 6.4hp 2-stroke engine
Easy-to-tune carburetor

INCLUDES:
1qty - 581192 695XL-GC Powerhead
1qty - 632196 Force3 16-inch Guidebar
2qty - 584294 Force3 Standard Chains

FREE GROUND SHIPPING!

ICS 695XL Data Sheet

ICS 695XL Owner's Manual

Chain TensioningTip Sheet

Cutting Tips Sheet

FORCE3 Chain Catalog

695XL Safety Notifications

READ THE Safety NOTICES from the ICS 695XL Operation Manual, before operating this equipment. It is each end user's responsibility to utilize the Manufacturer's published information for current changes.

0 stars based on 0 reviews

. . . . .

Add your review