Showingof 523 item(s)
10-inch FORCE Premium chain (13 Inch on 814PRO saws). For use on ICS RZ60, 603GC, 660GC, 613GC, 680 and 680ES power heads running 3/8" pitch chains. Good for cutting high pressure concrete with rebar.
$479.95
Chain Tensioner for use with pneumatic saws like the 701A P/N 70636
$89.95
16-inch FORCE3 General purpose chain. For use on ICS 623/633GC, and 695XL-GC power heads running 3/8" pitch chains. Good for cutting medium pressure concrete with no rebar.
$519.95
14-inch FORCE3 General purpose chain (16" on RockBoss Saws). For use on ICS 613GC, 680, 680ES, 623/633GC, 695XL-GC, and Stihl RockBoss power heads running 3/8" pitch chains. Good for cutting high pressure concrete with rebar.
$619.95
SPECIAL ORDER ITEM - CALL FOR LEAD TIME
The powerful ICS 890F4 hydraulic can be fitted with bars and chains up to 25 inches. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
The powerful ICS 890F4 hydraulic can be fitted with bars and chains up to 25 inches. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
$3,689.95
The powerful ICS 890F4 hydraulic can be fitted with bars and chains up to 25 inches. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
$3,739.95
Built to provide a combination of performance and portability for cutting in-ground utility pipe, the 680ES-PG Gas Power Cutter with PowerGrit® chain will change the way you cut pipe. Includes TWO CHAINS and FREE GROUND FREIGHT (Contiguous US)
$1,969.95
14-inch FORCE3 General purpose chain (16" on RockBoss Saws). For use on ICS 613GC, 680, 680ES, 623/633GC, 695XL-GC, and Stihl RockBoss power heads running 3/8" pitch chains. Good for cutting medium pressure concrete with no rebar.
$479.95
*** THIS BAR IS NO LONGER AVAILABLE *** Replaced by the IB15-635700 guide bar. Referred to as a 15" Guide Bar based on cutting depth, this bar measures 20.3" from tip to tip. For use on hydraulic and pneumatic saws.
$209.95
This bar will be superceeded by the IB12-632194 guide bar. Referred to as a 12" Guide Bar based on cutting depth, this bar measures 17.5" from tip to tip. For use on medium gas saws (680ES) and 536E 220volt saws
$159.95
A perfect choice for the occasional concrete cutter. Power Head is equipped with a 3/8" Pitch drive sprocket, 0.444" Pitch drive sprocket available upon request. Easy to start with a new multifunction lever to control choke, run, and stop functions.
$1,289.95