13' High-Cycle 13' Concrete Vibrator FXA50A4
2" head, 13.1' hose, with 33' cord
Waterproof control box
Powered by a 4.5-amp electric motor, permanently lubricating oversized head bearings for unmatched durability.
Requires GDP5HA high-cycle generator
Waterproof control box
Powered by a 4.5-amp electric motor, permanently lubricating oversized head bearings for unmatched durability.
Requires GDP5HA high-cycle generator
| Article number: | MUL-FXA50A4 |
| Availability: | Out of stock |
Multiquip FXA50A4 High-Cycle Vibrator
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.