2" head, 13.1' hose, with 33' cord
Waterproof control box
Powered by a 4.5-amp electric motor, permanently lubricating oversized head bearings for unmatched durability.
Requires GDP5HA high-cycle generator
| Article number: | MUL-ZZ-180EC50 |
| Availability: | Out of stock |
MULTIQUIP 180EC50 High-Cycle 50' Extension Power Cord
The 180EC50 50' extension power cord is a heavy-duty power cable with plug and connector that is designed to be used with the Multiquip GDP5HA generator and Multiquip FXA high-cycle vibrators. These cords are specifically designed to be used with high-cycle vibrators using three-phase motors at 180 cycles that require a special generator capable of generating 180 cycles.
Related products
High-cycle vibrator used with low-slump concrete where consistent power is needed for stiff mixes; corners, around rebar and removing entrapped air pockets. The benefit is this vibrator retains 95% power under load.
$1,998.95
High-cycle vibrator with consistent power to work a stiff mix into corners, around rebar and remove air pockets. Free shipping to most lower 48 destinations.
CESSCO sells the Multiquip FXA60A4 with free freight to most lower 48 destinations.
CESSCO sells the Multiquip FXA60A4 with free freight to most lower 48 destinations.
$2,028.95
High-cycle vibrators are easy, efficient, and excellent in low-slump concrete. Perfect for navigating around rebar and tight corners. Requires high-cycle generator. CESSCO sells the Multiquip FXA60A6 with free freight to most lower 48 destinations.
$2,278.95
The 180EC100 100' extension power cord is a heavy-duty 12 gauge cable with plug and connector designed to be used with the Multiquip GDP5HA generator and FXA high-cycle vibrators. CESSCO sells the 180EC100 with free freight to most lower 48 destinations*
$558.95
The Multiquip GDP5A high-cycle, portable, gas-powered generator can simultaneously produce 60Hz/180Hz power for standard tools AND high-cycle vibrators. Designed by Multiquip for professional contractors.
$4,989.98