FXA50A4 MQ High-Cycle Concrete Vibrator, 2 "x 13'
2" head, 13.1' hose, with 33' cord
Waterproof control box
Powered by a 4.5-amp electric motor, permanently lubricating oversized head bearings for unmatched durability.
Requires GDP5HA high-cycle generator
Waterproof control box
Powered by a 4.5-amp electric motor, permanently lubricating oversized head bearings for unmatched durability.
Requires GDP5HA high-cycle generator
Article number: | MUL-FXA50A4 |
Availability: | Out of stock |
Multiquip FXA50A4 High-Cycle Vibrator*
*Prices, features and equipment specs. are subject to change without notice.
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.
- Visit mfg. website for more info: https://www.multiquip.com/multiquip/FXA50A4.htm