Products tagged with guide bar

FORCE4 Abrasive Combo Pack for large gas saws include:
(2) P/N 531747 FORCE4 Abrasive 25 Chains
(1) P/N 643704 FORCE4 10" Guide bar
FREE GROUND FREIGHT.

Referred to as a 20" Guide Bar based on cutting depth, this bar measures 24" from tip to tip. For use on large gas (ICS 695XL-F4) power heads running .444-inch pitch chains.

FORCE3 Brick 35 LRG Combo Pack for large gas saws (95-101cc): 623GC, 633GC, 695GC, 695XL-GC include:
(2) Each FORCE3 Brick 35 Chains P/N 584301
(1) Each 632196 FORCE3 Guide Bar
(1) Each 70949 Drive Sprocket

FORCE3 Premium 25 Combo Pack for 814PRO Hydraulic model 814PRO saw includes:
(2) Each FORCE3 Premium25 Chains P/N 584295
(1) Each 635696 FORCE3 Guide Bar for 814PRO Saws
(1) Each 71385 Drive Sprocket for 814PRO Saws

FORCE3 Premium 29 LRG Combo Pack for large gas saws (95-101cc): 623GC, 633GC, 695GC, 695XL-GC include:
(2) Each FORCE3 Premium 29 Chains P/N 584298
(1) Each 635705 FORCE3 Guide Bar
(1) Each 70949 Drive Sprocket

FORCE3 Standard 29 MED Combo Pack for medium gas saws (76.5 - 80cc): 613GC, 680GC, 680ES includes:
(2) Each FORCE3 Standard 29 Chains P/N 584290
(1) Each P/N 71395 FORCE3 Guide Bar
(1) Each 70949 Drive Sprocket

Cut up to 20 inch pipe with the powerful ICS 701A pneumatic. The safest way to cut pipe. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi EVERY SAW PACKAGE SOLD BY CESSCO Inc includes FREE GROUND FREIGHT

Cut up to fifteen inch pipe with the powerful ICS 701A pneumatic. The safest way to cut pipe. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi EVERY SAW PACKAGE SOLD BY CESSCO Inc includes FREE GROUND FREIGHT

This concrete cutting saw package is configured for the uncompromising contractor. Cut up to 14-inches deep with the powerful 6.4 HP 695XL-GC.
Includes TWO CHAINS and FREE GROUND.

Referred to as a 14" Guide Bar based on cutting depth, this bar measures 19.7" from tip to tip. For use on medium gas saws and 536E 220volt saws. Will be replaced by IB14-635697.

Referred to as a 10" Guide Bar based on cutting depth, this bar measures 14.8" from tip to tip. For use on small gas saws. Fits ICS 603GC, 660GC ad Redzaw RZ60 power heads.

Referred to as a 14" Guide Bar based on cutting depth, this bar measures 19.75" from tip to tip. For use on large gas saws. 3/8" pitch