Products tagged with guide bar

*** THIS BAR IS NO LONGER AVAILABLE *** replaced by IB16-635701. Referred to as a 16" Guide Bar based on cutting depth, this bar measures 21.9" from tip to tip. For use on large (695XL-F4) gas power heads running .444-inch pitch chains.

FORCE4 PREMIUM S Combo Pack for Hydraulic / Pneumatic saws include:
(2) P/N 531741 FORCE4 PREMIUM S 34 Chains
(1) P/N 529767 FORCE4 20" Guide bar
FREE GROUND FREIGHT.

FORCE4 Premium S Wide Kerf (0.375") Combo Pack for large gas saws include:
(2) P/N 570943 FORCE4 Wide Kerf 29 Chains
(1) P/N 635700 FORCE4 15" Guide bar
FREE GROUND FREIGHT.

FORCE4 PREMIUM S Combo Pack for large gas saws include:
(2) P/N 531735 FORCE4 PREMIUM S 29 Chains
(1) P/N 635701 FORCE4 16" Guide bar
(1) P/N 525496 FORCE4 Sprocket for ICS Gas Saws (7-spline)
FREE GROUND FREIGHT.

FORCE3 Premium 35 LRG Combo Pack for large gas saws (95-101cc): 623GC, 633GC, 695GC, 695XL-GC include:
(2) Each P/N 584303 FORCE3 Premium 35 Chains
(1) Each P/N 632196 FORCE3 Guide Bar
(1) Each P/N 70949 Drive Sprocket

Cut up to fifteen inch pipe with the powerful ICS 890F4 hydraulic. The safest way to cut pipe. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi. EVERY SAW PACKAGE SOLD BY CESSCO Inc includes TWO CHAINS,

Cut concrete up to fifteen inches deep with the powerful ICS 890F4 hydraulic. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi. EVERY SAW PACKAGE SOLD BY CESSCO Inc includes TWO Chains and FREE GROUND FREIGHT.

*** PLEASE NOTE: THIS GUDE BAR IS DISCONTINUED *** Replaced by IB25-635702. For use on ICS hydraulic and pneumatic powerheads.

Referred to as a 14" Guide Bar based on cutting depth, this bar measures 19.9" from tip to tip. For use on large gas saws.
3/8" Pitch

This bar replaces IB16-524490. 16-inch cutting depth -- measures 21.9-inches from tip-to-tip. For use with large gas (695XL-F4) power heads running .444-inch pitch chains.

This bar replaces IB20-529767 guide bar. Referred to as a 20" Guide Bar based on cutting depth, this bar measures 24.8" from tip to tip. For use on hydraulic and pneumatic saws running .444-inch pitch Force 4 chains.

Referred to as a 12" Guide Bar based on cutting depth, this bar measures 19.5" from tip to tip. For use on medium gas saws with 25 segment PowerGrit Chains ONLY - For use on 536E 220v saws with 25 segment FORCE4 or PowerGrit Chains.