Showingof 242 item(s)
The versatile ICS 701A pneumatic cuts concrete up to fifteen inches. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi. EVERY SAW PACKAGE includes TWO CHAINS AND FREE GROUND FREIGHT
$6,109.95
A perfect choice for the occasional concrete cutter. Power Head is equipped with a 3/8" Pitch drive sprocket, 0.444" Pitch drive sprocket available upon request. Easy to start with a new multifunction lever to control choke, run, and stop functions.
$1,289.95
680ES-14 GC Gas Saw Package with 35 cm/14 in GC guide bar & FORCE3 chain
Cuts up to fourteen inches deep; uses 3/8" pitch bars and chains.
All 680ES Saw Packages include TWO CHAINS and FREE GROUND FREIGHT.
Cuts up to fourteen inches deep; uses 3/8" pitch bars and chains.
All 680ES Saw Packages include TWO CHAINS and FREE GROUND FREIGHT.
$1,969.95
Configured with 0.444-inch pitch sprocket for Force4 and PowerGRIT chains. Cuts up to 20-inches deep. Powerful 6.4 HP two-cycle motor. Power head only. Free ground freight.
$2,219.95
For the uncompromising concrete cutter looking for the most powerful gas saw ICS offers. Includes TWO 16-inch Force 4 standard chain and 16-inch ProForce guide bar. Includes TWO CHAINS and FREE GROUND FREIGHT.
$3,279.95
This concrete cutting saw package is configured for the uncompromising contractor. Cut up to 14-inches deep with the powerful 6.4 HP 695XL-GC.
Includes TWO CHAINS and FREE GROUND.
Includes TWO CHAINS and FREE GROUND.
$2,899.95
14-inch FORCE3 General purpose chain (16" on RockBoss Saws). For use on ICS 613GC, 680, 680ES, 623/633GC, 695XL-GC, and Stihl RockBoss power heads running 3/8" pitch chains. Good for cutting high pressure concrete with rebar.
$619.95
FORCE4 Premium L Combo Pack for hydraulic / pneumatic saws include:
(2) P/N 531751 FORCE4 Premium L 34 Chains
(1) P/N 529767 FORCE4 20" Guide bar
FREE GROUND FREIGHT.
(2) P/N 531751 FORCE4 Premium L 34 Chains
(1) P/N 529767 FORCE4 20" Guide bar
FREE GROUND FREIGHT.
$2,179.90
SPECIAL ORDER ITEM - CALL FOR LEAD TIME
Cut up to fifteen inch pipe with the powerful ICS 890F4 hydraulic. The safest way to cut pipe. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
Cut up to fifteen inch pipe with the powerful ICS 890F4 hydraulic. The safest way to cut pipe. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
$4,649.95
Cut up to fifteen inches deep with the powerful ICS 890F4 hydraulic. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi. EVERY SAW PACKAGE includes Powerhead, Guide Bar, TWO chains, and FREE GROUND FREIGHT.
$4,699.95
The powerful ICS 890F4 hydraulic can be fitted with bars and chains up to 25 inches. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
$3,739.95