2" head, 13.1' hose, with 33' cord
Waterproof control box
Powered by a 4.5-amp electric motor, permanently lubricating oversized head bearings for unmatched durability.
Requires GDP5HA high-cycle generator
FXA50A6 MQ High-Cycle Concrete Vibrator, 2" x 20'
High-cycle vibrator used with low-slump concrete where consistent power is needed for stiff mixes; corners, around rebar and removing entrapped air pockets. The benefit is this vibrator retains 95% power under load.
Article number: | MUL-FXA50A6 |
Availability: | Out of stock |
Multiquip FXA50A6 High-Cycle Vibrator*
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.
- 2" head, 20' hose, 33' cord, 180 Hz
- Powered by a 2-amp electric motor
- Permanently lubricated oversized head bearings for unmatched durability
- Waterproof control box
- Optional 50- and 100-foot (15, 30 meters) extension cords available
- Requires high-cycle generator GDP5HA
- Visit mfg. website for more info: https://www.multiquip.com/multiquip/FXA50A6.htm