GDP5HA High-Cycle Single-Phase Gas-Powered Generator
The Multiquip GDP5A high-cycle, portable, gas-powered generator can simultaneously produce 60Hz/180Hz power for standard tools AND high-cycle vibrators. Designed by Multiquip for professional contractors.
| Article number: | MUL-GDP5HA |
| Availability: | Out of stock |
Multiquip GDP5HA High-Cycle Single-Phase Generator
The only generator that simultaneously produces 60Hz/180Hz power for standard tools AND high-cycle vibrators. Powered by a Honda GX340 engine, this unit takes the place of two generators. Ideal for the professional contractor.
-
- Powers up to three 2-inch (50 mm) FXA-series high cycle vibrators
- Control panel has separate 60Hz and 180Hz outlets
- Folding lifting bale is standard equipment
- Standard voltmeter assists in troubleshooting
- Produces 3.6kW of continuous 120/240-volt 60-cycle power for standard power tools
- Full panel GFCI protection - OSHA and NEC compliant
- Visit mfg. website for more info: https://www.multiquip.com/multiquip/GDP5H.htm
| Alternator Design | Brushless Revolving Field Type | |
| Fuel Tank Capacity | 5 gal | 19 L |
| Frequency | 60/180 Hz | |
| Phase | Single | |
| Continuous Output | 3.6 kW | |
| Maximum Output | 4 kW | |
| Voltage | 120/240 V | |
| Continuous Amps | 30A @ 120V | 15A @ 240V |
| Maximum Amps | 33A @ 120V | 16.5A @ 240V |
| Phase | 3-Phase | |
| Continuous Output | 5 kVA | |
| Voltage | 230 V | |
| Continuous Amps | 12.5 A | |
| Circuit Breakers | 60Hz - 30 A 180Hz - A |
|
| Number of Poles | 60Hz - 2 180Hz - 3 |
|
| 1 Receptacle of Each | L6-20R 250V T-Lock 20A L5-30R 125V T-Lock 30A |
|
| 3 Receptacles of Each | NEMA 7410 230V T-Lock 12.5A | |
| Overall Length | 28.34 in. | 72 mm |
| Overall Width | 22 in. | 55.88 mm |
| Overall Height | 21.25 in. | 54 mm |
Delivery of this product must be made to a commercial address.
Residential destinations will incur additional fees. A CESSCO representative will contact you with details. For inquiries, please call 800-882-4959 or email [email protected].